Sony KLV-15SR1 - Manual (Page 8)

8
Using Your New TV
16.5V
Getting Started (continued)
Pull here.
Cable cover
3° forward
To 16.5 V
AC power adapter
(supplied) AC cable
(supplied)
To mains
Rear of TV
Right side
15° backward
Connect the AC cable
To connect the TV to the mains, use the supplied AC power adapter and AC cable.
Note
• Do not remove the ferrite core from the AC power adapter.
To put the cables in the stand
You can put the aerial cable, AC power adapter cable and Scart cable in the stand.
1 Pull the upper edge of the cable cover
toward you and remove it.
2 Pass the cables into the stand.
3 Replace the cable cover while aligning
the claws on the cover with the holes
on the stand.
Note
• The other cables may not be put in the stand.
To adjust the TV angle
You can adjust the angle of the TV for
easy viewing.
Step 3
Insert the batteries into
the remote
Note
• Do not use old batteries or different types of batteries together.