Sony KLV-15SR1 - Manual (Page 19)

19 Adjusting Your Setup (MENU)
Adjusting the “SOUND” setting
The “SOUND” menu allows you to
adjust the sound setting.
1
Press MENU.
2 Press v or V to select
“SOUND,” then press OK.
3 Press v or V to select the
desired item, and press B
or b to adjust the value or
select the desired option
(see the table below).
Select “RESET” and press OK to reset the sound to the factory preset settings.
To return to the normal screen
Press MENU.
MENU
For Press B to Press b to
TREBLE decrease higher-pitched sound increase higher-pitched sound
BASS decrease lower-pitched sound increase lower-pitched sound
DUAL SOUND Press B or b to select “MONO” or “STEREO” for a stereo broadcast,
or “MONO,” “A” or “B” for a bilingual broadcast cyclically.
MONO/STEREO: Select “STEREO” or “MONO” for a stereo
broadcast.
MONO/A/B: Select “A” for sound channel 1, “B” for sound channel 2
or “MONO” for monaural channel if available.
Notes
• If the signal is very weak, the sound becomes monaural
automatically.
• If the stereo sound is noisy when receiving a NICAM programme,
select “MONO.” The sound becomes monaural, but the noise is
reduced.
OK
v / V / B
/ b
MENU
OK
DVD VCR
MENU REC
TV
OK
OK
SOUND
EXIT : MENU
TREBLE
BASS
RESET
DUAL SOUND : MONO OK
SOUND
EXIT : MENU
TREBLE
BASS
RESET
DUAL SOUND : MONO
OK OK
MENU
EXIT : MENU
PICTURE
SOUND
TIMER
SET-UP
OK