Safeguards, Grounding/earthing – Anton/Bauer Tandem 70 User Manual

Page 4

Advertising
background image

2

SAFEGUARDS

Power Sources:

This unit was designed to operate at mains voltages from
120 to 240 Volts AC, 50-60 Hz.

Risk of Electrical Shock: Refer servicing to qualified service personnel.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

A7595-0310

Rev

D

DA-C130 Sht 5 of 12

Top Edge of Paper is used as a

Cropmark.

GROUNDING/EARTHING

IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED.

To ensure safe operation, the three pin plug supplied must be inserted only into a
standard three-pin power point which is effectively grounded through the normal
household wiring. Extension cords used with the equipment must be three-conductor
and be correctly wired to provide connection to earth ground. Improperly wired
extension cords are a dangerous electrical hazard.

The fact that the equipment operates satisfactorily does not imply that the power point is
properly grounded and that the installation is completely safe. If any doubt exists about
the correct grounding of the power point, consult a qualified electrician.

IMPORTANT: The wires in this mains lead are colored in accordance with the

following code:

Green and yellow

Earth

Blue Neutral

Brown Live

Advertising