Anton/Bauer Tandem 70 - Manual (Page 9)

7
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
A7595-0310
Rev
D
DA-C130 Sht 10 of 12
Top Edge of Paper is used as a
Cropmark.
This equipment has been approved by one or more agencies. All changes and/or
modifications not expressly approved by Anton Bauer, Inc. could void the users’
warranty and authority to operate this equipment. There are no serviceable parts in
this equipment.
SPECIFICATIONS
Size 5.2” x 4.03” x 2.19”
Weight 16oz (1 lb.)
Input Voltage 120-240VAC 50/60 Hz
Output Voltage 16.4 VDC
Fuse Rating 7 amp Surface Mount
Maximum Power 70 watts at 16.4 volts
FUSE/TYPE REPLACEMENT
The fuse of the Tandem is a PCB mounted device which should only be replaced by a
qualified service technician.