Anton/Bauer Tandem 70 - Manual (Page 5)

3
Charging
As with all Anton/Bauer chargers, charging with Tandem is fully automatic. Mount any
Logic Series battery to the Tandem and it will automatically determine and execute the
appropriate charge routine.
Applications
A7595-0310 Rev D
DA-C130 Sht 6 of 12
The Tandem will charge any Anton/Bauer Logic Series Gold Mount ® battery including
model: ProPac ® , Trimpac ® , Digital ProPac, Digital Trimpac , HyTRON, and Dionic.
Top Edge of Paper is used as a
Cropmark.
NOTE: Anton/Bauer always recommends that each battery has its own charge
position. A battery can remain on an Anton/Bauer charger indefinitely.
The Tandem incorporates the exclusive InterActive ® communication between battery
and charger, which allows the charger to identify any Anton/Bauer battery attached and
determine the precise charge routine for that battery under the prevailing conditions.
NOTE: Due to the specialized communications between the charger and the
battery, batteries without the Logic Series construction and
communication capability (manufactured by Anton/Bauer before 1989
as well as so-called “rebuilds”) can not be charged with this charger.
The InterActive communication of Logic Series batteries is the key which
allows the Tandem to safely identify and address new style and chemistry
batteries as they are developed. Moreover, this communication ensures
that batteries contain the quality cells, workmanship and safety of
genuine Anton/Bauer products. If a non-Logic Series battery is placed
on the charger, the red and green LED indicators will flash alternately.
This indication means that the battery cannot communicate its identity
to the Tandem and is not charging. After 30 seconds of flashing green
and red LED’s, the red LED will remain on, indicating a HOLD state.
WARNING: USE OF THIS CHARGER WITH ANY BATTERY NOT
MANUFACTURED BY ANTON/BAUER MAY RESULT IN
BATTERY DAMAGE AND CAUSE RISK OF FIRE OR
PERSONAL INJURY.