AT&T TL96471 - Manual (Page 14)


Handset and telephone base settings
Set date and time
To set the date and time manually:
Press MENU in idle mode to enter the main menu.
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Set date/time,
then press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to select the month, then
press SET ., or enter the two-digit number ( 01-12) using
the dialing keys ( 0-9).
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to select the day, then press
SET ., or enter the two-digit number ( 01-31) using the
dialing keys ( 0-9).
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to select the year, then
press SET , or enter the two-digit number ( 00-99) using
the dialing keys ( 0-9), then press SET .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to select the hour, then
press SET ., or enter the two-digit number ( 01-12) using
the dialing keys ( 0-9).
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to select the minute, then
press SET ., or enter the two-digit number ( 00-59) using
the dialing keys ( 0-9).
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight AM or PM, or
press 2 for AM or 7 for PM. Press SET to save. You hear
a confirmation tone.
NOTE: If the date and time are not set when a message is recorded, the system announces,
“Time and day not set,” before each message plays.
.
2.
.
4.
5.
6.
.
.
Caller ID log
Intercom
Ringers
Set date/time
BACK SELECT
SET DATE
09/30/10
MM/DD/YY
BACK SET
SET TIME
05:41 PM
BACK SET
Intercom
Bluetooth
Ringers
Set date/time
BACK SELECT
SET DATE
Active devices
01/01/11
MM/DD/YY
BACK SET
SET TIME
Active devices
06:08 PM
BACK SET