AT&T TL96471 - Manual (Page 18)


Bluetooth setup
Add a headset
To pair and connect a headset:
Press MENU on the telephone base in idle mode to
enter the main menu.
Press
CID or DIR to highlight Bluetooth, then
press SELECT .
Press SELECT to choose Add device.
Press CID or DIR to highlight Add headset, then
press SELECT . The screen displays Please wait...
followed by If headset is connected to cell, please
disconnect it.
Press
NEXT . The screen displays Pls set headset to
discoverable mode. Set your headset to discoverable
mode (refer to the user’s manual of your headset),
then press
NEXT .
All devices that are connected to the telephone
base are temporarily disconnected.
The screen displays Searching for Bluetooth headsets...
When the screen displays the found devices, press
CID or DIR to highlight your headset and then
press SELECT .
Enter the PIN of your headset. The PIN for most
Bluetooth devices is
0000 (refer to the user’s manual
of your headset). Then press NEXT .
The screen will display Adding Headset A to device
list... when the base is connecting to your headset.
When a device is successfully connected, the handset
displays
Headset A is added and connected to base
and the corresponding status icon ( 1 or 2). You
hear a confirmation tone. The corresponding light on
the telephone base (
DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your headset, it may not
be compatible with your
TL96271/TL96371/TL96471 .
Check the Bluetooth compatibility list at
www.telephones.att.com
.
NOTE: The pairing process may take up to one minute. If the pairing
process fails, try again.
.
2.
.
4.
5.
•
6.
.
.
.
0.
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
Pls set headset
to discoverable
mode
BACK NEXT
DEVICE LIST
Add cellular
Add headset
BACK SELECT
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
BACK SELECT
ADD HEADSET
ENTER PIN
Active devices
_ _ _ _
BACK NEXT
Adding
Headset A
to device
list...
Headset A
is added
and connected
to base.