Handset and telephone base settings – AT&T TL96471 User Manual
Page 15
4
Handset and telephone base settings
Caller ID announce
By default, the caller ID announce feature is programmed
On.
To change the setting:
Press
MENU
on the handset or telephone base in idle
mode to enter the main menu.
Press
CID
or DIR on the handset, or press CID or
DIR on the telephone base to highlight Settings, then
press
SELECT
.
Press
CID
or DIR on the handset, or press CID or
DIR on the telephone base to highlight Caller ID Annc,
then press
SELECT
.
If you are changing the setting on the telephone base,
skip to Step 5.
-OR-
On the handset, press
CID or DIR to highlight
Handset or Base, then press
SELECT
.
Press
CID
or DIR on the handset, or press CID or
DIR on the telephone base to choose
On
or
Off, then
press
SET
to save. You hear a confirmation tone.
NOTES:
See your user’s manual for complete instructions on using all
features of this telephone.
Pronunciation of names may vary with this feature. Not all
names may be pronounced correctly.
.
2.
.
4.
5.
•
•
SETTINGS
Key tone
Dial mode
Caller ID Annc
BACK SELECT
CALLER ID ANNC
On
Off
BACK SET
CALLER ID ANNC
Handset
Base
BACK SELECT
SETTINGS
Key tone
Dial mode
Caller ID Annc
BACK SELECT
CALLER ID ANNC
On
Off
BACK SET