Alpine CDM-7874 - Manual (Page 18)

16
-EN
Indication for CD
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Mechanism error.
1. Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2. When the error indication remains after ejecting,
press the c button again.
If the error indication still does not turn off after
pressing the c button for a few times, consult your
Alpine dealer.
Note
When the "ERROR" or "- - - E" is displayed:
In case that the disc cannot be ejected by pressing the c
button, press the RESET switch (refer to page 4) and
press the c button again.
If not ejecting, consult your Alpine dealer.
• No CD is inserted.
- Insert a CD.
HI TEMP
(CDE-7872/CDE-7870 only)
– – – H
(CDM-7874 only)
– – – E ERROR
(CDM-7874 only) (CDE-7872/CDE-7870 only)
T – – – NO DISC
(CDM-7874 only) (CDE-7872/CDE-7870 only)
HI TEMP
ERROR - 01
NO MAGZN
Indication for CD Changer
(CDM-7874 only)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
NO DISC
Information