Alpine SEC-8058 - Manual (Page 152)

152
Using the CVA-1000
(sold separately)
English
Sensor Adjustment (Ra-
dar Sensor) (Continued)
Press and release the TX/PANIC and EXT1/
VALET buttons simultaneously. The siren will
chirp three times. The system will enter the
inner radar sector sensitivity adjustment
mode.
Press the TX/PANIC or EXT1/VALET button
to make the sensitivity adjustment (inside of
the car).
TX PANIC button: UP
EXT1/VALET button: DOWN
Note: If sensed, the Extension LED will blink
6 times.
Press and release the TX/PANIC and EXT1/
VALET buttons simultaneously. The Exten-
sion LED will blink twice. The CVA-1000 will
"close" the "Sensor Adjust" screen and the
security system will exit the radar sensitivity
adjustment mode.
Note: Please consult with the Alpine dealer.
5
TX
PANIC
E
X
T
1
/V
A
L
E
T
and/et/y
(SEA-8481)
5.^.&
6
TX
PANIC
E
X
T
1
/V
A
L
E
T
or/ou/o
(SEA-8481)
Security
MODE
RADAR (EXTERIOR) : LEVEL 1
RADAR (INTERIOR) : LEVEL 13
SENSOR
ADJUST
7
TX
PANIC
E
X
T
1
/V
A
L
E
T
and/et/y
(SEA-8481)