Sony PEG-SJ22 - Manual (Page 16)

16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
You cannot perform the HotSync
®
operation
You cannot use the Jog Dial™ navigator
B The JogAssist function is not set.
You cannot use the Jog Dial™ navigator for applications that do not
support the Jog Dial™ navigator operations when the JogAssist function is
not set. Tap to select the
Use JogAssist check box in the Jog
Preferences screen from Preferences .
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):
Setting the JogAssist function” in “Handbook.”
B The JogAssist function is not available for some applications.
Verify the following first
Verifying your CLIÉ handheld
B Is the connector of your CLIÉ handheld and the plug adapter (cradle) dirty?
If the connector is dirty, try connecting your CLIÉ handheld several times
to the plug adapter (cradle) to clean the connector.
B Are your CLIÉ handheld and the plug adapter (cradle) correctly
connected?
Check whether the Battery Remain
icon is displayed on the screen
of your CLIÉ handheld. If the icon is displayed, connect your CLIÉ
handheld to the AC power adapter.
B Is the memory space in your CLIÉ handheld sufficient?
Delete any unnecessary data and perform the HotSync
®
operation again.
B Are you using the same user name that is used for another CLIÉ handheld?
Change the user name.
Verifying your computer
B Is the Palm™ Desktop for CLIÉ software installed?