Sony PEG-SJ22 - Manual (Page 33)

33
Y
o
u forgot your passwor
d/
Y
o
u cannot use “Memory Stick
®
” media
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
You cannot use “Memory Stick
®
” media
You cannot copy/move data on “Memory Stick” media to
your CLIÉ handheld
B Make sure that the write protect tab of “Memory Stick” media is not set to
the LOCK position.
B The memory space in your CLIÉ handheld is insufficient.
To copy or move data on “Memory Stick” media to your CLIÉ handheld,
you need free memory space in your CLIÉ handheld that is at least the
same size as the data you copy or move.
Delete any unnecessary data.
“Insert a Memory Stick media” message is displayed when
“Memory Stick” media is inserted into the “Memory Stick”
slot
B “Memory Stick” media is not recognized properly.
Eject “Memory Stick” media and try inserting it again.
You cannot start applications installed in “Memory Stick”
media
B The memory space in your CLIÉ handheld is insufficient.
When you start an application installed in “Memory Stick” media on the
Application Launcher screen, you need free memory space in your CLIÉ
handheld that is at least the same size as the application you start.
Delete any unnecessary data.
B Select the location to “Memory Stick” media where the application is
installed and verify that the HotSync
®
operation is performed properly.
If the application is installed properly, copy or move the application in
“Memory Stick” media to your CLIÉ handheld using
Memory Stick
Gate .