Sony DPF-D1010 - Manual (Page 37)

37 GB
Ad
va
nce
d
o
pera
tio
ns
on. You can specify two or four hours as
an elapsed time.
5
Press v/V to select [Time Setting]
and press ENTER.
[Simple]
1 Select an item for which you want to set
the time.
Press
v / V to select [Power-ON timer]
or [Power-OFF timer] and press
ENTER. Press
v / V to select [Enable]
and press ENTER .
2 Set the time at which you want to
activate the Power-ON timer or Power-
OFF timer.
Press
v / V to select [Auto ON time] or
[Auto OFF time] and press ENTER.
Press
B / b to select the hour or minute,
press v / V to set the hour or minute, and
press ENTER.
3 Set the day of the week on which you
want to activate the timer.
Press
v / V to select [Auto ON day] or
[Auto OFF day] and press ENTER.
Press
v / V to select the day of the week
on which you want to activate the timer
and press ENTER. The select day of the
week is checked.
Press
v / V to move the cursor to [OK]
and press ENTER.
[Advanced]
1 Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press ENTER.
The power supply of the photo frame
will be turned on when the blue time
zone time occurs. The color of the
selected time zone changes to gray,
after you select the blue time zone and
then press ENTER. The power supply
of the photo frame is turned off while it
is in the gray time zone.
Tip
The power is turned off automatically at the
time you set for [Power-OFF timer] when
you are using the photo frame.
The power is turned on automatically at the
time you set for [Power-ON timer] during the
standby mode.
2 Press B/b/v/V to select [OK] and then
press ENTER.
[Auto off]
Continued