Sony NEX-VG20 - Manual (Page 83)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Repair Img. DB F.
See page 92, 95.
File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
memory card.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
Data Code
During playback, your camcorder displays
the information (Date/Time, Camera
Data) recorded automatically at the time of
recording.
 Off
Data code is not displayed.
Date/Time
Displays the date and time.
Camera Data
Displays camera setting data.
Date/Time
 Date
 Time
Camera Data
 SteadyShot off
 White Balance
 Shutter Speed
 IRIS (Aperture value)
 Gain
 Brightness
 Flash
 Exposure compensation
 ISO
Tips
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Wireless Remote Commander: [Date/Time] 
[Camera Data]  [Off] (no indication).
Depending on the memory card condition, bars
[--:--:--] appear.
Volume
You can adjust the volume of playback
sound by touching / .
TV Type
You need to convert the signal depending
on the TV connected when playing back
movies and photos. The recorded movies




Movie
Photo