Sony NEX-VG20 - Manual (Page 85)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
CTRL FOR HDMI (Control for
HDMI)
When connecting your camcorder to a
“BRAVIA” Sync compatible TV with an
HDMI cable (sold separately), you can play
back movies on your camcorder by aiming
the TV’s Remote Commander at the TV
(p. 40).
 On
Operates your camcorder using the TV’s
Remote Commander.
Off
Does not operate your camcorder using the
TV’s Remote Commander.
USB Connect
Select this item when [USB Select] does not
appear on the LCD screen by connecting
the camcorder to a computer with the USB
cable.
See page 64.
USB Connect Setting
You can set the USB transfer mode for
connecting the camcorder to a computer or
other USB device.
 Auto
The camcorder automatically selects the USB
transfer mode depending on the connected
device.
Mass Storage
This is a USB transfer mode compatible to
many types of USB devices.
MTP
This is a USB transfer mode compatible with
certain types of computers.
Notes
When you connect the camcorder to other
devices using the [MTP] mode, movies that
have been recorded with the same image quality
as the one currently selected (selected with
the [ / Setting] menu) can only be
displayed on the connected device.


When the camcorder is connected to an
external device in the [MTP] mode, movie
files will be displayed with the recorded
date, however, some information, such as
area information, included in the movie files
cannot be displayed on the connected device.
To import images from the camcorder to your
computer, use the supplied “PMB” software.
If the “Device Stage * ” window does not open
when you connect the camcorder to a computer
equipped with Windows 7, set [USB Connect
Setting] to [Auto].
* “Device Stage” is a menu of Windows 7, that is
used to manage devices (camcorder, camera,
etc.) that are connected to the computer.
Disc Burn
See page 55.
Beep
 On
A melody sounds when you start/stop
recording, or operate the touch panel.
Off
Cancels the melody.
LCD Brightness
You can adjust the brightness of the LCD
screen.
 Normal
Normal setting (normal brightness).
Bright
Select this when the LCD screen is not bright
enough.
Tips
This adjustment does not affect the recorded
images in any way.
The brightness is set to [Bright] automatically
when using the AC Adaptor.
VF Brightness
You can adjust the brightness of the
viewfinder.




