Sony NEX-VG20 - Manual (Page 24)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
4
Set [Daylight Savings] or [Summer Time], then touch [Next].
If you set [Daylight Savings] or [Summer Time] to [On], the clock advances 1 hour.
5
Select the date format, then touch [Next].
6
Select the date and time, touch / to set the value, then touch
[Next]  *.
* The confirmation screen appears only when you set the clock for the first time.
The clock starts.
Notes
The date and time does not appear during recording, but they are automatically recorded on the memory
card, and can be displayed during playback. To display the date and time, touch (MENU) 
[Setup]  [ ( Playback Settings)]  [Data Code]  [Date/Time]  .
You can turn off the operation beeps by touching (MENU)  [Setup]  [ ( General
Settings)]  [Beep]  [Off]  .
If the button you touch does not react correctly, calibrate the touch panel (p. 104).
To turn off the power
Slide the POWER switch to OFF.
The (Movie) lamp flashes for a few seconds and the camcorder is turned off.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Touch (MENU)  [Setup]  [ ( General Settings)]  [Language Setting]  a
desired language    .




