Sony NEX-VG20 - Manual (Page 94)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Self-diagnosis display/
Warning indicators
If indicators appear on the LCD screen or
viewfinder, check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:(or E:) : (Self-diagnosis display)
C:04: 
The battery pack is not an “InfoLITHIUM”
battery pack (V series). Use an
“InfoLITHIUM” battery pack (V series)
(p. 102).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 15).
C:06: 
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13:  / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E: :
Follow the steps from  on page 88.
 (Battery level warning)
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions,  may flash, even if there
are about 20 percent of remaining battery
charge.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.








(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 29.
No memory card is inserted (p. 29).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 59), delete unnecessary images, or
format the memory card (p. 82).
The image data base file may be damaged.
Check the data base file by touching
(MENU)  [Setup] 
[Repair Img. DB F.].
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 82).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 29).
 (Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to the
external media device)
The image database file may be damaged.
Check the database file by touching
(MENU)  [Setup] 
[Repair Img. DB F.].
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.













