Out), Help guide – Sony STR-DH750 User Manual
Page 137
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Setting the HDMI audio signal output of connected devices (HDMI Audio Out)
You can set the HDMI audio signal output of playback devices connected to the receiver via an HDMI
connection.
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Select [HDMI Audio Out].
3. Select the setting you want.
AMP:
HDMI audio signals from playback devices are only output to the speakers connected to the
receiver. Multi-channel sound can be played back as it is.
TV+AMP:
The sound is output from the speaker of the TV and the speakers connected to the receiver.
Note
Audio signals are not output from the speaker of the TV when [HDMI Audio Out] is set to [AMP].
The sound quality of the playback equipment depends on the sound quality of the TV, such as the number of
channels and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver
is in the same stereo as the TV, even when playing back multi-channel source.
When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver.
In this case, select [AMP].
4-488-933-11(1)
Copyright 2014 Sony Corporation
130