Sony STR-DH750 User Manual
Page 70
Video cable (not supplied)
Audio cable (not supplied)
Optical digital cable (not supplied)
Note
Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver.
Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV
screen may be distorted. If this is the case, place the antenna (aerial) farther away from the receiver.
When connecting an optical digital cable, insert the plugs straight until they click into place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
When connecting a TV to the receiver via the TV IN jacks of the receiver, set the sound output jack of the TV
to Fixed if it can be switched between either Fixed or Variable.
Related Topic
Enjoying sound of TV broadcasts from the receiver
Controlling HDMI devices (Control for HDMI)
Passing HDMI signals through (Pass Through)
Setting the HDMI audio signal output of connected devices (HDMI Audio Out)
4-488-933-11(1)
Copyright 2014 Sony Corporation
63