Sony STR-DH750 - Manual (Page 227)

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Auto Format Direct (A.F.D.)/2-channel sound mode
Auto Format Direct (A.F.D.) mode:
This mode allows you to listen to higher-fidelity sound and select the
decoding mode for listening to a 2-channel stereo or monaural sound as multi-channel sound.
2-channel sound mode:
You can switch the output sound to 2-channel sound regardless of the recording
formats of the software you are using, the playback device connected, or the sound field settings of the
receiver.
A.F.D. Auto (A.F.D. AUTO):
Presets the sound as it was recorded/encoded without adding any surround effects.
However, for USA and Canada models, this receiver will generate a low-frequency signal for output to the
subwoofer when there is no LFE signals.
Multi Stereo (MULTI ST.):
Outputs 2-channel left/right or monaural signals from all speakers. However, sound may not be output from
certain speakers depending on the speaker settings.
2ch Stereo (2CH ST.):
The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer.
Standard 2-channel stereo sources completely bypass the sound field processing and multi-channel surround
formats are downmixed to 2-channels.
Analog Direct (A. DIRECT):
You can switch the audio of the selected input to 2-channel analog input. This function enables you to enjoy
high-quality analog sources.
Only the volume and front speaker level can be adjusted when using this function.
Note
You cannot select [Analog Direct] while using the BD/DVD, GAME, or USB function.
[Multi Stereo] does not work when multi-channel audio signals are being received.
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
220