Sony STR-DH750 - Manual (Page 104)

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Selecting the Auto Calibration type (Calibration Type)
You can select a calibration type after you have performed the Auto Calibration and saved the settings.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [Calibration Type].
3. Select the setting you want.
Full Flat:
Makes the measurement of frequency from each speaker flat.
Engineer:
Sets to “the Sony listening room standard” frequency characteristics.
Front Ref. (Front Reference):
Adjusts the characteristics of all of the speakers to match the
characteristics of the front speaker.
Off
Note
This function does not work in the following cases:
[Analog Direct] is being used.
Headphones are connected.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input
signals, depending on the audio format.
Hint
You can also select [Calibration Type] in [Sound Effects] from the home menu.
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
97