Sony STR-DH750 - Manual (Page 115)

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Switching between digital and analog audio (Input Mode)
When you connect devices to both digital and analog audio input jacks on the receiver, you can fix the audio
input mode to either device, or switch from one to the other, depending on the type of material you intend to
watch.
1. Press the input buttons to select the input.
2. Select [Settings] - [Input Settings] from the home menu.
3. Select [Input Mode].
Auto:
Gives priority to digital audio signals. If there is more than one digital connection, HDMI audio
signals have priority.
If there is no digital audio signals, analog audio signals are selected. When TV input is selected, priority
is given to Audio Return Channel (ARC) signals. If your TV supports the ARC function, digital optical
audio signals are selected.
Optical:
Specifies input of digital audio signals to the OPTICAL jack.
Coaxial:
Specifies input of digital audio signals to the COAXIAL jack.
Analog:
Specifies input of analog audio signals to the AUDIO IN (L/R) jacks.
Note
Depending on the input, [Input Mode] may be dimmed on the TV screen and other modes cannot be
selected.
When [Analog Direct] is being used, audio input is set to [Analog]. You cannot select other modes.
Hint
You can also use INPUT SELECTOR on the receiver to select the input in step 1.
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
108