Sony DSC-WX5 - Manual (Page 47)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
47 GB
Viewing burst images
Plays back burst images.
1 Press the (Playback) button to switch to playback mode.
2 Select burst images using b/B on the control button.
3 Press the desired button according to the playback
mode.
• You can view the burst images as a movie only when you set [View Mode] to [Date View] and [Display
Burst Group] to [Display Main Image Only].
Operation method Action
Press V on the control button. Displays the burst images in index mode.
The display switches between single image display and thumbnail
image display each time you press z on the control button.
Press z on the control button. You can view the burst images as a movie by tilting the camera to
the right or left.
Note
z Displaying grouped burst images side by side
Only the main image is displayed if [Display Main Image Only] has been set. You can
display images in the index by following the procedure below.
1
Display the main image in playback mode, then press V on the control button.
The images are displayed in the index.
2
Press b/B to display each image in a burst group.
3 The display switches between single image display and thumbnail image display each time you
press z.
4 To cancel the display, press V.
Main image Thumbnail image
display Single image display
The image being displayed
above
Continued r