Burst settings, About the recording of burst shooting images – Sony DSC-WX5 User Manual
Page 65
Ta
ble
of
Op
e
MENU/Settin
In
65
GB
Burst Settings
You can select Single (single-image) or Burst as the shooting mode.
1 MENU t
(Burst Settings)
t desired mode
• [Burst Settings] is not available in the following situations:
– In Intelligent Sweep Panorama mode
– In Superior Auto Adjustment mode
– In Background Defocus mode
– In 3D shooting mode
– In Movie Mode
– When the Smile Shutter function is activated
– In Easy Mode
• [Flash] is set to [Off].
• When recording with the self-timer, a series of up to 10 images is recorded.
• The recording interval becomes longer, depending on the setting for the image size.
• [Focus], [White Balance], and [EV] are adjusted for the first image, and these settings are also used for
the other images.
• [VGA] image size will be set while recording on internal memory.
• When the battery level is low, or when the internal memory or a memory card is full, the burst stops.
• In slow shutter speed conditions, the burst of shots per second may be decreased.
(Single)
The camera shoots a single image.
(Burst)
The camera shoots up to 10 continuous frames in one burst when
you hold down the shutter button.
Notes
z
About the recording of burst shooting images
After shooting burst images, the shot images are displayed in frames on the LCD screen.
When all the images are fitted in the frames, recording is completed.
You can stop the recording by pressing z on the control button.
When stopped, the image displayed in index and images in the image processing are
recorded.