Sony DSC-WX5 - Manual (Page 91)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
91 GB
Protect
Protects recorded images against accidental erasure.
The
mark is displayed for registered images.
1 Press the (Playback) button to switch to playback mode.
2 MENU t (Protect) t desired mode t z on the control button
• When the internal memory is used to record images, View Mode is set to Folder View and still images
and movies are displayed in the same folder.
• When [Display Burst Group] is set to [Display Main Image Only], only the main image in the burst group
is protected. If you want to protect all images, set [Display Burst Group] to [Display All] first, then apply
the protection (page 88).
(This Image) Protects the currently displayed image in single-image mode.
(Multiple
Images)
You can select and protect multiple images.
After step 2, perform the following.
1 Select an image then press z.
Repeat the above step until there are no more images to be
protected. Select an image with a
mark to release the
mark.
2 MENU t [OK] t z
Notes
z To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing z on
the control button as the same procedure to protect it.
The
indicator disappears, and the protection is released.