Sony MZ-R37 - Manual (Page 19)

19
Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
4
1 2 3 4
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to add a mark.
“T. ON” appears in the display, and a
track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK.
Note
T MARK on the remote control does not
function during playback.
1 2 3 4 5
Track numbers increase
.
Track marking
T MARK•CANCEL
1
Keep pressing EDIT for 2 seconds or
longer during stop. “
” “Name”
flashes in the display.
2
Press = or + ((•+ on the
remote control) repeatedly until
“
” “Erase” flashes in the display.
3
Press ENTER.
“Erase?” and “ENTER” appear
alternately in the display.
To cancel erasing, press
p or
CANCEL.
4
Press ENTER again.
“EDIT” flashes in the display, and all
the tracks will be erased.
When erasing is complete, “BLANK”
flashes in the display.
T MARK•CANCEL
EDIT•INSERT
p•ENTER
=
(•+
Bottom