Sony MZ-R37 - Manual (Page 22)

22
3
Press ENTER.
The track is ready to be labeled.
4
Follow steps 4 to 6 of “Labeling a disc
during stop” above.
Labeling a track or a disc during
recording
1
Keep pressing EDIT for 2 seconds or
longer during recording.
“
” “Name” flashes in the display.
2
To label a track, press ENTER.
To label a disc, press
= or +
( (•+ on the remote control)
repeatedly until “ ” “Name”
flashes in the display, then press
ENTER.
3
Follow steps 4 to 6 of “Labeling a disc
during stop” above.
To cancel labeling, press CANCEL.
Available characters
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
• ! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
To relabel recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
keep pressing ENTER for 2 seconds or
longer.
Notes
•You cannot relabel premastered MDs or
label MDs that have not been recorded.
•The recorder is able to display, but cannot
label using, Japanese “Katakana”
characters.
Labeling a track during playback
1
Insert a disc and play the track you
want to label.
2
Keep pressing EDIT for 2 seconds or
longer.
“
” “Name” flashes in the
display.
3
Press ENTER.
4
Press = or + ((•+ on the
remote control) repeatedly to select a
letter and press ENTER to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
5
Repeat step 4 and enter all characters
of the label name.
6
Keep pressing ENTER for 2 seconds
or longer.
The track or disc is labeled.
Press
CAPS
VOL +/–
=/+
INSERT
DELETE
p
CANCEL
To
Switch between capital
letters, small letters, and
marks/numbers.
Move the cursor to the
left or right.
Change the letter to the
one before/next one.
Insert a blank space to
type in a new letter.
Delete a letter and move
back all following letters
to the left.
Cancel labeling.
Cancel labeling.