Sony DCR-DVD7 - Manual (Page 43)

43
Playback on DVD devices
DCR-DVD7
2-597-462-11(1)
5
When you have finished entering
characters, touch .
The disc title changes to the one you
entered.
6
Touch [END].
• When the disc has a title already set by other
devices, the 21st and subsequent characters are
deleted by this operation.
Step 5: Finalizing a disc
1
Confirm the settings you made in
steps from 2 to 4 of the “steps for
finalizing” on the LCD screen.
2
Touch .
3
Touch [YES]  [YES].
Finalizing starts.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during finalizing.
When you need to disconnect the AC
Adaptor, make sure that the power of your
camcorder is set to off and disconnect the
AC Adaptor after the CHG (charge) lamp
goes off. Finalizing restarts when you
connect the AC Adaptor and turn on your
camcorder again.
You cannot remove the disc until the
finalizing operation is completed.
4
Touch , when [Completed]
appears.
When using a DVD-R/DVD-RW
(VIDEO mode)/DVD+RW,

flashes after finalizing is completed
when the POWER switch is set to
(Movie) or (Still). Remove the disc
from your camcorder.
• When you make the settings to enable a
creation of a DVD menu on DVD-R/DVD-RW
(VIDEO mode)/DVD+RW, and finalize the
disc, the DVD menu appears for a few seconds
while finalizing the disc.
• You cannot view a Photomovie with the
DVD-R/DVD-RW (VIDEO mode) on your
camcorder.
• After finalizing a disc, the disc indicator and the
recording format are displayed as shown below:
DVD-R
DVD-RW (VIDEO mode)
DVD-RW (VR mode)
DVD+RW