Disc remain, Remote ctrl (remote control), Data code – Sony DCR-DVD7 User Manual
Page 61: Auto, Camera data, Date/time
61
Using the Setup items
DCR-DVD7
2-597-462-11(1)
•
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
•
The indicator toggles through the following
sequences as you press DATA CODE on
the Remote Commander: DATE/TIME
CAMERA DATA
OFF (no indicator).
•
Depending on the disc condition, bars [--:--:--]
appear.
•
The setting returns to [OFF] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
DISC REMAIN
AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
•
When you check the disc remaining by
sliding the POWER switch to
(Movie)
or
(Still).
•
When you set the POWER switch to
(Movie) or
(Still), then press DISP/
BATT INFO to switch the indicator from
off to on.
•
When the remaining capacity of the disc is
less than 5 minutes for
(Movie) or 30
images for
(Still).
•
When you start recording from the line
input.
ON
Always displays the remaining disc
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON] so that you can
use the Remote Commander (p. 37).
•
Set to [OFF] to prevent your camcorder
from responding to a command sent by other
equipment’s remote control.
•
The setting returns to [ON] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
DATA CODE
You can check the display information
recorded automatically (data code) during
playback.
OFF
Data code is not displayed.
CAMERA DATA
Displays the camera setting data of
recorded images.
DATE/TIME
Displays the date and time of recorded
images.
CAMERA DATA
Movie
VIDEO
AWB
100
9dB
F1. 8
AUTO
0:00:00
60min
Still image
5
6
7
OEV
60
F1. 8
VIDEO
10/10
60min
SteadyShot off
Exposure
White balance
Gain
Shutter speed
Aperture value
Exposure value
DATE/TIME
60min
11:23:45
AM
JAN 1 2005
VIDEO
0:00:00
9
8
Date
Time