Sony DCR-DVD7 - Manual (Page 60)

60
DCR-DVD7
2-597-462-11(1)
MULTI-SOUND
You can select to play back audio recorded
using other devices whether with dual
sound or with stereo sound.
 STEREO
Plays back with main and sub sound (or
stereo sound).
1
Plays back with main sound or the left
channel sound.
2
Plays back with sub sound or the right
channel sound.
• The setting returns to [STEREO] when you
have the power source disconnected from your
camcorder for more than 5 minutes.
MICREF LEVEL
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
 NORMAL
Records various surround sounds,
converting them into the same level.
LOW
Records surround sound faithfully.
This setting is not suitable for recording
conversations.
• The setting returns to [NORMAL] when you
have the power source disconnected from your
camcorder for more than 5 minutes.
LCD SET
The recorded picture will not be affected
even when you change the setting.

LCD BRIGHT
You can adjust the brightness of the LCD
screen.
 Adjust the brightness with / .
 Touch .

LCD BL LEVEL
You can adjust the brightness of the LCD
screen’s backlight.
 NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you use an AC Adaptor as the power
source, [BRIGHT] is automatically selected for
the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.

LCD COLOR
You can adjust the color on the LCD screen
with
/ .
Low intensity High intensity
 WIDE DISPLAY
You can select how a 16:9 aspect ratio
picture appears in the LCD screen.
 LETTER BOX
Normal setting (standard type of display)
SQUEZE (Squeeze)
Expands the picture vertically when black
bands appear at the top and bottom of the
screen in 16:9 aspect ratio.
• When you set the POWER switch to (Still),
[WIDE DISPLAY] does not appear.
USB SPEED
You can select data transfer speed used to
transfer data to your computer.
 AUTO
Sends data by switching automatically
between the Hi-Speed USB (USB2.0) and
the speed corresponding to USB1.1 (full
speed transfer).
FULL SPEED
Sends data corresponding to USB1.1 (full
speed transfer).
STANDARD SET (continued)