Aastra Telecom VentureIP - Manual (Page 21)

Model VentureIP 480i User Guide 18
Making and Receiving Calls
Making and Receiving Calls
Handsfree Calling
The Handsfree feature allows you to speak to someone without using
the handset. To dial using Handsfree, press
d/f and then enter a number.
To answer using Handsfree, press d/f when a call is ringing.
To switch between Handsfree and the handset when the handset is off
hook, press
d/f . When the handset is on hook, press d/f to disconnect
a Handsfree call. When Handsfree is on, the speaker light turns on. When
the speaker light is on, press
a at any time to mute Handsfree. The speaker
light will flash and you will hear the caller, but they will not hear you.
To switch between Handsfree and mute press
a .
Note: Handsfree operation as described above will be affected and may
be disabled if the set audio option has been activated. See the section
“Customizing your phone” for more information.
Make Calls Using a Stored Number List
You can use entries in any of the stored number lists to make a call.
Redialing a Recently Called Number
1. Press the 2 key. The Outgoing Call List is shown on the display screen.
2. Use the s r keys to move from one entry to the next.
3. If the number must be edited before using (for example, if a local call
includes an area code), press Edit# and edit the number.
4. With the desired entry shown on the display screen:
• For handset operation, lift the handset.
• For Handsfree operation, press the d/f key.
The selected number is dialed.