Sony PCG-XG38 User Manual
Page 53
Using PC cards
53
Insert the PC card slot protector back into the empty slot.
Removing a PC card
1
Double-click
in the system task tray.
2
The “Unplug or Eject hardware” dialog box appears.
3
In the Unplug or Eject Hardware dialog box, select the appropriate option,
and then click Stop.
4
Confirm the device and click OK.
✍
Do not force a card into the slot, as this may damage the connector pins. If you have
difficulty inserting a card, check that you are inserting the card with the correct
orientation. See the manual that came with your PC card for more information on use.
For some PC cards, if you alternate between normal power operation and the System
Suspend or System Hibernation power management modes while the card is inserted,
you may find that a device connected to your system is not recognized. Restart your
system to correct the problem.
Removing PC card
✍
If your computer is turned off, you do not have to follow these instructions.
Upper eject button
Lower eject button