Sony PCG-XG38 - Manual (Page 60)

VAIO Notebook User Guide
60
Removing the Optional Hard Drive
(PCGA-HDX10)
Windows Me models
1 Click the Remove multipurpose bay device icon on Power Management. The
Device Swapping message appears.
2 Slide the Release lever on the bottom of the unit in the direction of the arrow
and hold while sliding the device out of the multipurpose bay.
3 Click OK.
Windows 2000 models
1 Double-click in the system task tray.
2 The “Unplug or Eject” dialog box appears.
3 In the Unplug or Eject Hardware dialog box, select the appropriate device,
and then click Stop.
4 Confirm the device and click OK.
5 A message appears informing you that the device can now be safely removed
from the system.
6 Slide the RELEASE lever on the bottom of the computer in the direction of
the arrow and then unplug the drive from the computer.
✍
When the computer is in power saving mode, you cannot remove the hardware
device
✍
While using the optional hard drive (PCGA-HDX10) in the multipurpose bay, do
not put the system into Power Saving Mode. Power saving mode may not work
properly and unsaved data may be lost.