Sony DVP-F25 - Manual (Page 18)

18
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup
TV
• Surround effects: TVS DYNAMIC (page 47),
TVS WIDE (page 47)
(page 19) Example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 47)
or
MD deck/DAT deck
• Surround effects: none (page 20) Example
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 62)
(page 21) Example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 63),
DTS (5.1ch) (page 63)
(page 22) Example
A D
A
B
C
D