Sony DVP-F25 - Manual (Page 23)

23
H
ook
up
s
Step 3: Attaching the Jack Cover and Stand
You can use the player laid flat, or in an
upright position by attaching the supplied
stand to the rear or side of the player. You can
also install the player on the wall.
Attaching the jack cover (Using
the player laid flat)
1
Gather all the connecting cords
together and let them pass through the
center of the opening at the back of
the player.
2
Attach the jack cover carefully so as
not to pinch the cords.
3
Place the player flat on a level
surface.
Notes
• Make sure that the connecting cords are not
trapped by the jack cover.
• Do not apply downword force to the player with
the disc window facing down. Doing so may
cause scratches or damage to the player.
• If you use commercially available cords, it is
recommended that you use cords similar in size to
the cords provided with the player. If the cords are
too thick or stiff, or the plug is too large, you may
not be able to attach the jack cover securely. If
you cannot attach the jack cover, you do not have
to attach the jack cover.
Using the player in the upright
position
Make sure you attach the supplied stand.
To stand the player on its rear
1
Attach the stand to the screw hole of the
jack cover using the supplied screw.
2
Place the player upright on the stand.
c continued