Sony DVP-F25 - Manual (Page 68)

68
Specifications
System
Laser: Semiconductor laser
Signal format system: NTSC
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(AUDIO OUT L/R jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
When you play PCM sound tracks with a
96 kHz sampling frequency, the output
signals from the DIGITAL OUT (OPTICAL)
jack are converted to 48 kHz sampling
frequency.
Outputs
(Jack name: Jack type/Output level/Load
impedance)
AUDIO OUT L/R: Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/-18 dBm (wave length:
660 nm)
COMPONENT VIDEO OUT (Y, P
B
, P
R
):
Phono jack/Y: 1.0 Vp-p/P
B
, P
R
: 0.7 Vp-p/
75 ohms
VIDEO OUT: Phono jack/1.0 Vp-p/75 ohms
S VIDEO OUT: 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.286 Vp-p/75 ohms
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 9 W
Dimensions (approx.): 196
Ч
61
Ч
265 mm
(7 3 /
4
Ч
2 1 /
2
Ч
10 1 /
2
in.) (width/height/
depth) incl. projecting parts
Mass (approx.): 1.8 kg (3 lb 14 oz)
Operating temperature: 5
°
C to 35
°
C
(41
°
F to 95
°
F)
Operating humidity: 25 % to 80 %
Supplied accessories
See page 13.
Specifications and design are subject to
change without notice.
E
NERGY
S
TAR R is a U.S. registered mark.
As an
E
NERGY
S
TAR R Partner, Sony
Corporation has determined that this product
meets the
E
NERGY
S
TAR R guidelines for
energy efficiency.