Sony CMT-M90DVD - Manual (Page 42)

42 GB
CMT-M90DVD 4-239-826-11(1) GB
Notes
• When you select an item, the sound cuts off for a
moment.
• When the playing signal does not contain a signal
for the rear speakers, the surround effects may be
difficult to hear.
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings. Otherwise, the VES effect may be
hard to discern.
• “VES NIGHT” only works with Dolby Digital
discs. However, not all discs will respond to the
“VES NIGHT” in the same way.
• If you use the DIGITAL OUT jack, sound will
come from your speakers but it will not have the
VES effect.
Enjoying virtual surround sound
(continued)
Display
Turning off the display
— Power Saving Mode
Even if the system is off, the system consumes
power to display the clock and to stay
responsive to commands from the remote.
Power saving mode reduces the amount of
power consumed during standby.
In this mode, the clock is not displayed.
Press DISPLAY on the remote repeatedly
while the system is off until the clock
display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
as follows:
Clock display
y No display (Power Saving
Mode)
Tip
The timer continues to operate in Power Saving
Mode.
Using the display
Checking the remaining time/
titles (DVD/VIDEO CD/CD)
When a CD TEXT disc is loaded, you can
check the information stored on the disc, such
as the titles. When the unit detects CD TEXT
discs, the “TEXT” indication appears in the
display.