Sony RMT-840 - Manual (Page 103)

Qu
ic
k Refer
ence
Quick Reference 103
A
LANC jack (blue)
The LANC control jack is used for
controlling the tape transport of video
device and peripherals connected to it.
B
i (headphones) jack
When you use headphones, the speaker on
your camcorder is silent.
C Hook for the shoulder strap (p. 101)
D
HDV/DV jack (p. 46, 70, 71, 74, 75, 77)
E S VIDEO jack (p. 46, 48, 72, 75)
F COMPONENT OUTPUT jack (p. 46, 48)
G Tripod receptacle
Make sure that the length of the tripod
screw is less than 5.5 mm (7/32 inch).
Otherwise, you cannot attach the tripod
securely, and the screw may damage your
camcorder.
H AUDIO/VIDEO jack (p. 46, 48, 72, 75,
78)
I MIC (PLUG IN POWER)/LINE jack
(red) (p. 78)
J Microphone (p. 78)
K Front camera recording lamp (p. 20)
L Front remote sensor
M Speaker
N Lens (Carl Zeiss Lens)
Your camcorder is equipped with a Carl
Zeiss lens which can reproduce fine images.
The lens for your camcorder was developed
jointly by Carl Zeiss, in Germany, and Sony
Corporation. It adopts the MTF
measurement system for video cameras and
offers a quality as fine as a Carl Zeiss lens.
The lens for your camcorder is also T*-
coated to suppress unwanted reflection and
faithfully reproduce colors.
MTF stands for Modulation Transfer
Function.The value number indicates the
amount of light from a subject coming into
the lens.
, continued