Sony RMT-840 - Manual (Page 82)

Dubbing/Editing 82
Importing a picture to the
computer
1
Turn on the analog device.
2
Set the POWER switch to VCR.
Use the AC Adaptor (supplied) as the
power source.
3
Press MENU.
4
Select the (IN/OUT REC) menu
by turning the SEL/PUSH EXEC dial,
then press the dial.
5
Select [A/V t DV OUT] by turning
the SEL/PUSH EXEC dial, then press
the dial.
6
Select [ON] by turning the SEL/PUSH
EXEC dial, then press the dial.
7
Press MENU to hide the menu screen.
8
Start playback on the analog device.
9
Start importing on the computer.
Refer to the manual supplied with the
program software or its on-line help for
details.
After importing the picture and sound
Stop importing on the computer, and stop
playback on the analog device.
b Note
• Your camcorder may not be able to output the signal
to the computer correctly depending on the video
signal input to your camcorder.
• You cannot import pictures that have been recorded
using a copyright protection signal to a computer via
your camcorder.
• Analog signals are not output from the
COMPONENT OUTPUT jack.