Sony RMT-840 - Manual (Page 12)

Getting started 12
5
Set the POWER switch to OFF (CHG).
The CHG (charge) lamp lights up and
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1 Set the POWER switch to OFF (CHG).
2 Press BATT RELEASE and slide the
battery pack up.
To check the remaining battery – Battery
Info
You can check the battery’s current charge level
and its current remaining recording time both
during charging or when the power is turned off.
The remaining recording time in the selected
recording format appears.
1 Set the POWER switch to OFF (CHG).
2 Open the LCD panel and adjust the
angle.
3
Press DISPLAY/BATT INFO.
The battery information appears for about
7 seconds.
Keep the button pressed to view it for about
20 seconds.
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B Possible recording time using the LCD
panel.
C Possible recording time using the
viewfinder.
BATTERY INFO
50% 0% 100%
BATTERY CHARGE LEVEL
REC T I ME AVA I LABLE
LCD SCREEN:
V I EWF I NDER: 1 1 0 min
1 2 5 min