Sony HDR-UX1 - Manual (Page 114)

114
Troubleshooting (Continued)
The supplied Remote Commander does not function.
• Set [REMOTE CTRL] to [ON] (p. 92).
• Insert a battery into the battery holder with the +/– polarities correctly matching the +/–
marks (p. 138).
• Remove any obstructions between the Remote Commander and the remote sensor.
• Point the remote sensor away from strong light sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander may not function properly.
• Remove the conversion lens (optional) as the remote sensor may be obstructed by it.
Another DVD device malfunctions when you use the supplied Remote
Commander.
• Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of
your DVD device with black paper.
You cannot play back a disc.
• Slide the POWER switch to turn on your camcorder and press (VIEW IMAGES).
• On the HOME MENU, touch (VIEW IMAGES), then [VISUAL INDEX].
• Check out the disc compatibility (p. 20).
• Insert a disc with the recording side facing your camcorder (p.37).
• The disc that was recorded, formatted, of finalized on other devices may not be played back
on your camcorder.
The playback image is distorted.
• Clean the disc using a soft cloth (p. 130).
Still images stored on a “Memory Stick Duo” are not played back in the actual
size.
• Still images recorded on other devices may not appear in the actual size. This is not a
malfunction.
Still images stored on a “Memory Stick Duo” cannot be played back.
• Still images cannot be played back if you have modified files or folders, or have edited the
data on a computer. (The file name flashes in that case.) This is not a malfunction (p. 133).
• Still images recorded on other devices may not be played back. This is not a malfunction
(p. 133).
Remote Commander
Playing back a disc on your camcorder