Sony HDR-UX1 - Manual (Page 123)

123
Trou
bl
esh
oot
in
g
% (Moisture condensation warning)*
Slow flashing
• Remove the power source, and then
leave it for about 1 hour (p. 136).
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing *
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Warning indicator pertaining to
“Memory Stick Duo”)
• No “Memory Stick Duo” is inserted
(p. 39).
(Warning indicators pertaining to
“Memory Stick Duo” formatting)*
• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not
formatted correctly (p. 77, 132).
(Warning indicator pertaining to
incompatible “Memory Stick Duo”)*
• An incompatible “Memory Stick Duo”
is inserted (p. 77, 132).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 132).
• Access to the “Memory Stick Duo” was
restricted on another device.
(Warning indicator pertaining to
the flash)
Slow flashing:
• Still charging
Fast flashing:
• There is something wrong with the
flash.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient,
so camera-shake easily occurs. Use the
flash.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
* You hear a melody when the warning indicators
appear on the screen (p. 89).
If messages appear on the screen, follow the
instructions.
x Drive
Z Drive error. Turn on power again.
• A problem may have occurred with the
disc drive. Turn off and then on again.
x Moisture condensation
% Moisture condensation. Turn off
for 1H. (p. 136)
% Condensation. Cannot open.
Remove disc later. (p. 136)
Description of warning
messages
Continued ,