Sony HDR-UX1 - Manual (Page 57)

57
Pl
ay
bac
k
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
When you want to play the sound in monaural mode, use a connecting cable for that purpose.
b Notes
• When you output images using the A/V connecting cable, images are output with SD (standard definition)
image quality.
z Tips
• If you connect your camcorder to your TV using more than one type of cable to output images, the order
of priority of the output signal is as follows:
HDMI
t component video t S VIDEO t audio/video.
• HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.