Sony DCR-TRV33 - Manual (Page 155)

155
Viewing images with your computer
Connecting your camcorder to a computer using the USB cable
(For Windows users)
Installing ImageMixer
Make sure USB driver installation is complete.
“ImageMixer Ver. 1.5 for Sony” is an application that can capture or edit images, or
create video CDs.
To install and use this software in Windows 2000, you must be authorized as
administrators. For Windows XP, you must be authorized as computer administrators.
(1) Turn on a computer and allow Windows to load. If you have been using the
computer, close all softwares.
(2) Insert the supplied CD-ROM into the CD-ROM drive of the computer.
The application software starts up.
(3) Select "Handycam” on the screen.
The title screen appears.
(4) Move the cursor to “ImageMixer” and click.
Click
The Install Wizard program starts up and the “Choose Setup Language”
screen appears.
(5) Select the language for installation.
(6) Follow the on-screen messages.
The installation screen disappears when installation is complete.
(7) Install the Win ASPI following the on-screen message (Windows 2000 and
Windows XP users only).
(8) If DirectX 8.0a or later is not installed on the computer, continue installation
after installing ImageMixer.
Follow the on-screen messages to install DirectX 8.0a. After installation is
complete, restart the computer.
Memory Mix Album (DCR-TRV22/TRV33 only)
Once “ImageMixer” is installed, the Memory Mix album is created in “Album” of
“ImageMixer” and sample images are stored in there.
Those sample images can be transferred from the Memory Mix album to a “Memory
Stick” so that they can be used in MEMORY MIX (p. 120).
For details on the operation procedure, refer to the on-line help.