Sony DCR-TRV33 - Manual (Page 24)

24
Operation buttons on each display
When the POWER switch is set to CAMERA
PAGE1 SPOT FOCUS, MENU, FOCUS, FADER, END SCH, SPOT METER,
EXPOSURE
PAGE2 DIG EFFT*, SELFTIMER, LCD BRT, SUPER NS*, VOL, COLOR SLW S*,
MEM MIX*
* DCR-TRV22/TRV33 only
When the POWER switch is set to VCR
PAGE1 MENU, LCD BRT, VOL, END SCH
PAGE2 DATA CODE, DIG EFFT*, PB ZOOM*
PAGE3 V SPD PLAY, A DUB CTRL, REC CTRL
* DCR-TRV22/TRV33 only
When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only)
During memory camera
PAGE1 SPOT FOCUS, MENU, FOCUS, PLAY, PB FOLDR, SPOT METER,
EXPOSURE
PAGE2 SELFTIMER, PLAY, MEM MIX
PAGE3 LCD BRT, PLAY, VOL
During memory playback
PAGE1 MENU, CAM, PB FOLDR, DEL
PAGE2 PB ZOOM, CAM, RESIZE*, DATA CODE
PAGE3 LCD BRT, CAM, VOL
* DCR-TRV33 only
Notes
•When using the touch panel, press operation buttons lightly with your finger
supporting the LCD panel from the back side of it.
•Do not press the LCD screen with sharp objects such as a pen.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DSPL/BATT INFO on your camcorder.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
When using the viewfinder
You can also operate with the touch panel (p. 70).
Step 3 Using the touch panel