Sony DCR-TRV33 - Manual (Page 124)

124
You can carry out a time-lapse recording by setting the camcorder to automatically
record still images.
Example
[a] Memory Photo recording
[b] INTERVAL
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select INT. R -STL in
, then press EXEC (p. 180).
(4) Select SET, then press EXEC.
(5) Select INTERVAL, then press EXEC.
(6) Select a desired interval time, then press EXEC.
(7) Press
RET.
(8) Set INT. R -STL to ON, then press EXEC.
(9) Press EXIT to return to FN.
The INTERVAL MEM STILL indicator flashes on the screen.
(10) Press PHOTO deeply.
Interval Photo Recording starts.
The INTERVAL MEM STILL indicator lights up on the screen during Interval
Photo Recording.
To cancel Interval Photo Recording
Set INT. R -STL to OFF in the menu settings.
Interval Photo Recording
[b] [b]
[a] [a] [a]
4 5
MEM SET 2
INT. R -STL
INTERVAL
EXIT
RET. EXEC
1MIN
5MIN
10MIN
MEM SET 2
INT. R -STL
INTERVAL
EXIT
RET. EXEC
1MIN
PHOTO