Focusing manually, Focus – Sony DCR-TRV33 User Manual

Page 66

Advertising
background image

66

2

4

FOCUS

MANU–

AL

AUTO

OK

AUTO

MANU–

AL

OK

You can gain better results by manually adjusting the focus in the following cases.
Normally, focus is automatically adjusted.
•The autofocus mode is not effective when shooting:

– Subjects through glass coated with water droplets
– Horizontal stripes
– Subjects with little contrast with backgrounds such as walls or the sky

•Shooting a stationary subject when using a tripod
•When you want to change the focus from a subject in the foreground to a subject in

the background

The POWER switch should be set to

or

(DCR-TRV22/

TRV33 only).
Operate by touching the panel.

(1) Press FN to display PAGE1.
(2) Press FOCUS.
(3) Press MANUAL. The screen to adjust the focus appears.
(4) Press

T or t

to sharpen focus.

(5) Press

OK to return to PAGE1.

To return to FN

Press EXIT.

To return to the autofocus

On the FOCUS screen, press

AUTO to return to PAGE1.

To focus precisely
It is easier to focus on the subject if you adjust the zoom to shoot at the “W” (wide-
angle) position after focusing at the “T” (telephoto) position.

When you shoot close to the subject
Focus at the end of the “W” (wide-angle) position.

9

changes as follows:

when recording a distant subject
when the subject is too close to focus on

Focusing manually

Advertising
This manual is related to the following products: