Sony SVZ13116GXX - Manual (Page 124)

Note
Be sure to use the AC adapter supplied with the docking station. If you use the AC
adapter supplied with your VAIO computer, you may lose all unsaved data.
After connecting the docking station to your VAIO computer, leave them unused for
about 10 seconds.
To disconnect the docking station
1. Close certain software applications, such as using the graphics accelerator and
accessing the optical disc drive or the USB port on the docking station.
2. Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off.
Hint
Alternatively, you can click (Start), (arrow) next to the Shut down button,
and Undock to disconnect the docking station from your VAIO computer.
If you press the UNDOCK button while your VAIO computer is in a power saving
mode, the computer returns to Normal mode.
After the computer returns to Normal mode, be sure to disconnect the docking
station from the computer. Otherwise, the computer may become unstable.
When your VAIO computer is off, make sure the IN USE indicator light is off, and
then unplug the docking station connector from the computer without pressing the
UNDOCK button.
3. Hold the docking station connector and unplug it from your VAIO computer.
Note
Do not disconnect the docking station from your VAIO computer while the IN USE
indicator light is on.
Doing so may result in loss of unsaved data and the failure of the computer. Make sure
the IN USE indicator light is off and then disconnect the docking station by following the
above steps.
When disconnecting the docking station while the computer is in Hibernate mode or
124
Click to Search