Restricting the use of built-in devices, How to use – Sony SVZ13116GXX User Manual
Page 137
VAIO User Guide SVZ1311 Series
Back
|
How to Use
Restricting the Use of Built-in Devices
The BIOS function enables you to disable the built-in devices such as the following. You can
use this function to prohibit external connections and communications
USB Ports
Memory Card Slot (“Memory Stick Duo” slot and SD memory card slot)
Optical Disc Drive
Wireless Device
LAN Device (LAN port)
1. Turn on your VAIO computer and press the F2 key repeatedly until the VAIO logo
disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer
and try again.
2. Press the or key to select the Advanced tab.
3. Press the or key to select your desired built-in device, and press the Enter key.
4. Press the or key to select Disabled or Enabled, and press the Enter key.
When you select Disabled:
The selected device is disabled.
When you select Enabled:
The selected device is enabled and can be used on your VAIO computer.
5. Press the or key to select the Exit tab, select Exit Setup, and then press the
Enter key.
At the confirmation prompt, press the Enter key.
Note
Devices you can disable vary depending on the model.
Even if you restrict the use of the USB ports and the LAN port, you cannot disable the
docking station (supplied or optional) connected to your VAIO computer and the device
connected to the docking station.
© 2012 Sony Corporation
137
Click to Search