Sony DCR-IP7BT - Manual (Page 45)

45
Additional information
Additional information
Troubleshooting
If a problem occurs, please check the following items. If you cannot resolve
the problem, contact your sony dealer.
z Hint
When you capture images from or export files to MICROMV devices, see "Limitations
and notes for capturing from or exporting to MICROMV devices" of the on-line help.
Symptom Cause/Remedy
I can only play a final movie
product; I cannot process it. If more than one scene is selected from the Product
tray, you cannot process them. Sequential scenes and
their transitions only can be previewed for the
purpose of observing the flow from scene to scene.
Importing an exported movie
product does not place its
scenes in the Product tray. When an exported movie product is placed on the
Clip tray, it is handled as a single clip. Thus its scenes
and BGM are not displayed on the Product tray, as
they were when movie making was in progress.
It takes a long time to export a
final movie product. Exporting a final movie product to a file or to an
external device is time-consuming to complete. The
"MICROMV" or "Export to MICROMV device" option
takes a particularly long time.
It takes a long time to complete
operations. When you use large amounts of data (e.g., more than
one clip at the same time, etc.), it may be time-
consuming to complete the operation. In this case, be
sure not to perform any other operations until
completion.